Where the gyro works
WindowsSteam DeckLinuxmacOSSwitchSwitch 2PS4PS5XboxAndroidiOS
Gyro worksSupported without gyro
6-axis gyro: native on Switch/Switch 2 in Switch mode (all connections). PC gyro only via Switch mode + Steam Input or Machenike software mapping; none in XInput.
Measured latency
Cable1.41 ms
2.4 GHz11.1 ms
Bluetooth17.1 ms
| Input | Connection | Mode | Avg | Min | Max | Jitter | Polling |
|---|---|---|---|---|---|---|---|
| Button | Cable | XInput | 1.41 ms | 0.28 | 4.31 | 1.16 | 1000 Hz |
| Button | Cable | Switch | 8.34 ms | 3.7 | 12.8 | 2.37 | 125 Hz |
| Button | 2.4 GHz | XInput | 11.1 ms | 5.52 | 20.37 | 3.5 | 1000 Hz |
| Button | Bluetooth | Switch | 17.1 ms | 11.17 | 25.2 | 2.97 | 125 Hz |
| Button | Bluetooth | XInput | 17.88 ms | 10.01 | 49.63 | 6.28 | 125 Hz |
| Button | 2.4 GHz | Switch | 21.11 ms | 14.25 | 30.63 | 3.79 | 125 Hz |
| Stick | Cable | XInput | 9.55 ms | 8.88 | 10.46 | 0.37 | 1000 Hz |
| Stick | 2.4 GHz | XInput | 31.24 ms | 25.65 | 37.72 | 2.94 | 1000 Hz |
Measurements from Gamepadla (GPDL software method or Prometheus 82 hardware tester) unless stated in the sources below. Values in milliseconds.
Pros and cons
- Very low wired latency (1.41 ms)
- Hall effect sticks — no drift from wear
- Gyro works on both PC and Switch
- 4 back buttons
- Trigger stops for faster shots
- Nothing significant
Specifications
- Sticks
- Hall effect
- Stick layout
- Asymmetric
- Button layout
- Xbox
- Triggers
- Analog
- Trigger stops
- Yes
- Trigger vibration
- No
- Back buttons
- 4
- Max polling rate
- 1000 Hz
- Rumble
- Dual motors
- 2.4 GHz modes
- XInput, Switch
- Cable modes
- XInput, Switch
- Bluetooth modes
- XInput, Switch
- PC software
- Yes
- Mobile app
- No
- Macros
- Yes
- No-deadzone mode
- No
- NFC
- No
- Wakes Switch
- No
- Swappable layout
- No
- Battery
- 600 mAh
- Firmware updates
- Yes
Sources
- https://gamepadla.com/machenike-g5-pro-v2.html
- https://www.newegg.com/machenike-g5-pro-v2-pc-grey/p/232-019Z-000T4
Data verified 2026-10.